EasyManua.ls Logo

70mai M200 - Specifications; Memory Card Instructions

70mai M200
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Specifications
Product
Dash cam
Model
M200
Input
5V 1.5A
Battery capacity
300mAh
Battery type
Li-ion battery
Power supply
Car cigarette lighter
Wireless connectivity
Wi-Fi IEEE 802.11 b/g/n 2.4 GHz
Wi-Fi operation frequency
2400-2483.5MHz
Wi-Fi maximum output
<20dBm
Memory Card Instructions
A memory card (sold separately) must be installed in the dash cam before use.
The dash cam supports standard microSD cards. Please use memory cards with
capacity of 16GB ~ 128GB and rating of class 10 or higher.
The default file partition format of the memory card may be inconsistent with the
format supported by the dash cam. When inserting the memory card for the first
time, please format it in the dash cam before use. Formatting the memory card
will delete all files on the card. Please back up important data to another device
beforehand.
The memory card may become damaged or deteriorated after repeated cycles of
overwriting, and this may affect its ability to save video and image files. If this
occurs, immediately replace it with a new memory card.
Please use a high-quality memory card purchased from a reputable vendor.
Inferior memory cards may have issues such as actual reading/writing speeds
that do not match the stated speeds, and an actual storage capacity that does
not match the stated storage capacity. The manufacturer shall not be held liable
for lost or damaged videos caused by the use of a low quality memory card.
Do not insert or remove a memory card while the dash cam is turned on.

Related product manuals