Safety instructions
LEREF "Verzeichnis Ueberschrift" \* MERGEFORMAT Index
Fehler! Verwenden Sie die Registerkarte 'Start', um Verzeichnis Ueberschrift
dem Text zuzuweisen, der hier angezeigt werden soll.Contents
3. Safety instructions
Follow the operating instructions.
Keep the operating instructions with the device.
Regularly instruct staff in all relevant issues regarding occupational safety, the operat-
ing instructions and, in particular, the safety instructions they contain.
Ensure that the device is only operated if in perfect condition. Never use a damaged
device (physically damaged or malfunctioning).
Ensure the device is only operated by qualified personnel.
Connect and use the device only as specified.
Operate the device only with the recommended accessories.
Ensure that the device is operated only in its original condition.
Ensure that the device is only operated within the permissible rated data
Do not install or operate the device in environments where explosive gases, dust or
vapours may be present, i.e. that generally do not meet the requirements mentioned
in the technical datasheet.
Clean the device only with cleaning products that comply with the manufacturer's
specifications.
Use only spare parts and auxiliary materials that have been approved by the manufac-
turer.
Maintenance and repair of an open REG-D(A) Relay for Voltage Control & Transformer
Monitoring (plug-in module without housing) must only be carried out by authorised,
qualified personnel and must satisfy EMC Directives.
No supply or control voltage should be applied to a disassembled plug-in module, e.g.
open (disassembled) REG-D(A) Relay for Voltage Control & Transformer Monitoring, as
electrical parts carrying dangerously high voltages could be encountered.
Please note that these operating instructions may not always contain the latest
information concerning the device. Should you require a more recent version
of these instructions or have any questions about the product or how to use it,
please contact the REGSys
TM
Support on:
+49 (0)911 628108-101 or via email at: regsys-support@a-eberle.de.
A. Eberle GmbH & Co. KG does not accept any liability for damage or losses of any kind
arising from printing errors or changes in this manual.
Furthermore, A. Eberle GmbH & Co. KG will not accept any liability for loss or damage of
any kind resulting from faulty equipment or devices that have been modified by the user.
To Next Page
Loading...
Need help?
General
