8
For customer support, visit www.ahbeard.com or call: 1300 654 000
STEP 14
Basic setup is now complete! See page 9 for remote control
operating instructions.
Locate the mattress retainer bar brackets. Slide the left side of the
mattress retainer bar into the bracket. Pull the retainer bar to the
opposite bracket and secure the right side.
installation guide
This is an optional accessory that can be used if the mattress
does not have a Clip Lock System.
If the mattress does not have a Clip Lock System, please proceed to
Step 14 for Mattress Retainer Bar installation.
Ensure batteries are correctly installed in the back of the remote.
Quickly test functions to verify proper setup before placing
mattress on base. Press FLAT to return the base to a flat position.
STEP 13
To Next Page
Loading...