A.H.Beard Genius - Remote Control; Remote Overview and Features; One-Touch Preset Positions

9
REMOTE OVERVIEW
remote control
10, 20, 30 Minute
Massage Timer Lights
Head Massage
(6 intensities)
Timer/All O
Pairing Light
Lifts and Lowers Head
Rest Preset Position
Recline Preset Position
Foot Massage
(6 intensities)
Turn on Head and
Foot Massage
Lifts and Lowers Foot
Zero-G Preset Position
Relax Preset Position
The MASSAGE button activates and toggles through massage levels 1, 3 and 6.
A 4th press of the button will turn the massage o.
The HEAD button will turn on the head massage. Press '+' or '-' to cycle
through 6 massage intensities.
The FOOT button will turn on the head massage. Press '+' or '-' to cycle
through 6 massage intensities..
The TIMER/ALL OFF button Starts massage at level 3. Select a 10, 20 or 30
minute massage interval. Pressing a fourth time will turn o massage.
The light on the top of the remote indicates a 10, 20 or 30 minute timer
setting. Massage will automatically shut o after 10 minutes if the massage
timer isn’t set.
MASSAGE FEATURE
The HEAD arrows lift and lower the head section of the base.
The FOOTarrows lift and lower the foot section of the base.
ADJUST
Pairing Light provides soft glow lighting (see pairing instructions if required
on pg. 13).
One touch ZERO G (Recover) preset position. Zero-G adjusts your legs to a
higher level than your heart helping to relieve pressure o the lower back and
promote circulation.
One touch Rest preset position.
One touch Recline preset position.
One touch Relax preset position.
ONE TOUCH BUTTONS
ZERO G