Insufficient or no hot water
at all
The temperature is set too low
Adjust the regulating thermostat
higher
The safety thermostat is
interrupting the electric circuit
There is no hot water supply left
Reduce the hot water
consumption. Admit the necessary
heating time
The plug is out of the socket
Put the plug into the socket
The cause cannot be determined
Turn off the main switch and/or
remove the plug from the socket
Insufficient packing of the water
connection (threaded connection)
Tighten the threaded connections
Leakage due to other water
apparatus or pipes, sited in the
neighborhood
2.6 Spare Parts
When ordering spare parts, it will be
necessary to specify the type of apparatus
and the complete serial number. Thereby,
the data of the spare parts can be
determined.
To Next Page
Loading...
