What to do if there's water leakage from A.O. Smith HeatBot Wi-Fi?
If you notice water leaking from your A.O. Smith Water Heater, it could be due to a tank or parts leakage. Immediately switch OFF the power and call Customer Care Centre.
How to fix piping connection leaks in A.O. Smith Water Heater?
If you have piping connection leaks in your A.O. Smith Water Heater, it's likely that the connection isn't sealed properly. Re-connect the piping, making sure to use Teflon tape to ensure a tight seal.
What to do if A.O. Smith HeatBot Wi-Fi heats slowly?
If your A.O. Smith Water Heater heats slowly, the cause may be low voltage at the supply mains. Check the voltage at the supply mains. Another possible cause is scale deposition, in that case call Customer Care Centre.
Why A.O. Smith HeatBot Wi-Fi Water Heater LED display has no display?
If there is no display on the LED display of your A.O. Smith Water Heater, it could be due to no power supply to the Water Heater. Check the power supply and switch ON the electrical switch. Alternatively, the Thermal Cut-out may have tripped, or there could be a problem in the internal wiring or PCB, in that case call Customer Care Centre.
Why A.O. Smith HeatBot Wi-Fi Water Heater LED display glows but no hot water?
If the LED display glows on your A.O. Smith Water Heater but there is no hot water, it could be due to Heating Element breakdown or internal wiring error or PCB problem. Call Customer Care Centre.
What to do about foul smell from hot water in A.O. Smith Water Heater?
If you notice a foul smell from the hot water in your A.O. Smith Water Heater, it could be due to several reasons: - The presence of organic matter in the input water: Provide treated water at the input. - No usage of hot water for a long time period: If the Water Heater is not used for an extended period of time, drain the water from the Water Heater. Ensure water is filled back before use of Water Heater. - High electrical conductivity of water due to dissolved solids in input water: Call Customer Care Centre. Anode options available for highly conductive water.
Why is water dripping from the Multi-function Safety valve of A.O. Smith HeatBot Wi-Fi Water Heater?
If water is dripping from the Multi-function Safety valve during heating of your A.O. Smith Water Heater, it's likely because the non-return valve is installed too close to the inlet. Install the Non-return valve at a distance of at least 40 feet from the inlet of the Water Heater, if problem still persists call Customer Care Centre.
What causes water temperature to be too high in A.O. Smith HeatBot Wi-Fi Water Heater?
If the water temperature is too high in your A.O. Smith Water Heater, it could be due to improper thermistor operation or the Thermal Cut-out not operating. In both cases, call Customer Care Centre.
General| Brand | A.O. Smith |
|---|---|
| Model | HeatBot Wi-Fi |
| Category | Water Heater |
| Type | Electric |
| Wi-Fi Connectivity | Yes |
| Energy Efficiency | High Efficiency |
| Power Source | Electric |
| Voltage | 240V |
| Wattage | 4500W |
| Control | Smartphone App |
| Capacity | 50 gallons |
| Energy Factor | 0.95 |
| Warranty | 10 years |
Instructions for checking shipments for visible damage or loss upon delivery.
Procedure for reporting damage discovered after the shipment has been received.
Guide to operating and maintaining the water heater safely; read before use.
Information on environmentally responsible disposal of the water heater and accessories.
Explanation of DANGER, WARNING, and CAUTION symbols and their potential hazards.
Warning against using the heater if any part has been submerged in water.
Importance of professional installation by an authorized service technician.
Verifying heater condition and ensuring correct voltage supply before installation.
Details the product model and core technical specifications like power and voltage.
Table listing the physical dimensions for 15L and 25L water heater models.
Diagram illustrating the external dimensions (A-F2) of the water heater.
Visual representations of bottom and side views with numbered parts and their descriptions.
Precautions for installation site, avoiding direct sunlight, rain, and splashes.
List of tools needed for the installation process.
Guidelines for securely mounting the heater, including clearance and wall support.
Steps for using a mounting template and drilling holes for installation.
Instructions for inserting expansion anchors and tightening mounting screws.
Illustration showing how to mount the water heater onto the wall bracket.
Diagram showing connections for cold water, hot water, and safety valve.
Instructions for connecting the Multi-function Safety Valve and flexible hoses.
Explanation for potential dripping from the safety valve and mitigation advice.
Step-by-step guide to filling the water heater tank before initial operation.
Critical caution against operating the heater with insufficient water.
Illustration showing how to connect the heater's power cord to a socket.
Crucial safety advice for electrical connections, including adapters and earthing.
Basic steps for setting up a wireless router and Wi-Fi compatibility notes.
Guide to finding and installing the AO Smith Smart App from app stores.
Steps for signing up, agreeing to terms, and verifying the account via email.
Setting a secure password and proceeding to use the AO Smith Smart App.
Steps to add the water heater and select the 'Water Heater (Wi-Fi)' category in the app.
Inputting the Wi-Fi network name and password for connection.
Guide to configuring Wi-Fi and understanding the Wi-Fi LED indicator status.
Confirming the Wi-Fi LED status and completing the device addition to the cloud.
Detailed breakdown of the app's main screen features and controls.
Setting and displaying water temperature via the app and the heater's display panel.
Controlling modes like Auto/Timer, Power, Timing, Override, and Instant Heating.
Explanation of indicators and physical control buttons on the heater's display panel.
Description of the heater's state and initial display actions upon first power connection.
Setting desired temperature manually and selecting from various pre-set modes.
Table providing reference temperatures for pre-set modes for 15L and 25L models.
App notification feature indicating when the target water temperature is reached.
Details on Auto, Timer, Override, One Time Heating, and Sleep modes.
Features for tracking energy usage trends and calculating consumption costs.
Comprehensive guide to setting up the AO Smith skill with Amazon Alexa.
Illustrative examples of voice commands for controlling the water heater.
Explanation of the heating operation mode and its LED indicator status.
Explanation of the standby operation mode and its LED indicator status.
Procedure for safely draining the water from the tank for extended periods or freezing.
Essential safety advice: turn off power before draining and be aware of scalding hazards.
Solutions for issues like no display, no hot water, or high temperature.
Troubleshooting slow heating, piping leaks, and water leakage from the product.
Resolving piping connection leaks, safety valve dripping, and foul smell from water.
Contact number for customer care if problems persist after troubleshooting.
Details on error codes E1, E3, E7 and recommended actions.
Schematic representation of the water heater's internal electrical components.
Warning against using external switching devices with the thermal cut-out.
Advantages of remote operation via the AO Smith Smart App and Alexa integration.
Benefits including longer tank life, glass lining, and double safety mechanisms.
Note stating the company's right to amend or modify specifications without prior notice.
To Next Page