09
Do not connect hot water supply to the
purifier. Make sure that the inlet water
temperature to the purifier should be
between 5°C to 45°C. (Figure 8)
Figure 8
Do not open the purifier for cleaning the
filters or for any part replacements. This
must be done only by A. O. Smith
Company authorised service technician.
(Figure 10)
Figure 10
Figure 9
Do not use the purifier if the power cord
is damaged or you notice strange noise,
burning smell or smoke. Switch off the
power, unplug the power cord
immediately and call Customer care
centre. (Figure 9)
Figure 11
Do not place any chemicals, thinner, soap
or any other cleaning items on the
product. (Figure 11)
CAUTION
Hot water
supply
CAUTION
CAUTION
CAUTION
To Next Page
Loading...
