13
SEC. 2.a.
SALE PRICE CHANGE
Limit price change and P2 (for 00 version)
This function is on just in case a validator with a collection limit is
used.
It allows the setting of an acceptance maximum value, and defines
the value of a token.
Entering the function through key “OK” the display shows if the
function is activated or not with +/- is possible to modify it and to
confirm by OK. The set limit value then is displayed. The value is
changeable by means keys “+” and “-“.
Confirming the date through key “OK”, the value which can be
assigned to a token appears.
When a token is not used of, moove through +/- up to get the
message “OPTION DISABLE”
SEC. 2.b.
SALE PRICE CHANGE
Sale price change (for 10 version)
This function allows the setting or changing of the sale price.
Entering the function through key “OK”, the 1
st
sale price is
displayed. It can be changed through keys “+” and “-“.
When the desired price is reached, it has to be confirmed by means
of key “OK”. Then the 2
nd
sale price is dispkayed and can be
changed as before.
NOTE: to set a free sale price, push key “-“ to obtain 0.
To inhibit a price, bring it to “OPTION DISABLE”
To Next Page
Loading...