18
SEC. 8.a.
CREDIT COLLECTION
Change collection enabling (for 10 version)
This function enables or inhibits the change collection i.e. credit in
excess of sale price. Entering the function through key “OK”, it is
shown as “OPTION DISENABLE” if inhibited.
If it is shown as“OPTION ENABLE” function is enabled. Push key
“+” to change the state and “OK” to confirm and exit.
SEC. 8.b
CREDIT COLLECTION
Credit collection (for 40-60-70 versions)
By means of this function it is possible to enable or inhibit the
service which memorises possible collected credits in case the
machine is switched off.
Enter the function through key “OK”.
If it is displayed “OPTION ENABLING” the service will be
enabled, if “OPTION DISENABLE” the service will be inhibited.
Through key “+” it is possible to change the state and through key
“OK” to confirm and exit.
SEC. 9
DISPLAY OPTION
Forward/reverse display (for 10 version)
This function allows alteration of the minimum lenght of the
external reset signal. Necessary to be considered by the
coinmech.Time can be set with changes of 10 msec, from 10 msec
to 2.55 sec. Standard time is 100 msec.
SEC.10
DELAY SETTING (for 70 version)
When the coin mechanism enables the last sale cycle, it is possible
through this function to delay the fall of sale relay in order to let the
machine correctly end the cycle.
Entering the function through key “OK”, it shows a number which
indicates the delay lenght in msec. Push key “+” and “-“ to change
it. Push key “OK” to confirm. Time can be set with changes of 10
msec, from 10msec to2.55 msec.
To Next Page
Loading...