AAB ABM-200 - Troubleshooting Common Issues; Device Not Found; Air Speed Reading Issues; Temperature;Humidity Reading Issues

10
Troubleshooting
PROBLEM
POSSIBLE CAUSE
CORRECTION
ABM-200 not found
Low/dead battery
Replace battery
Bluetooth off
Turn on phone’s Bluetooth
Pairing not performed
through app
Un-pair in OS and pair
through app
Incorrect air speed reading
Low battery
Replace battery
Incorrect AK %
Correct AK adjust
percentage
Meter not
perpendicular to airflow
Adjust fan directly into
airflow
Obstruction in front of
meter
Remove obstruction
Move meter to side
obstruction
Slow temperature/humidity
response
Low air flow
Move into air stream
Ports blocked
Remove obstruction from
front and/or rear ports
Incorrect
temperature/humidity reading
Low Battery
Replace battery
Meter acclimating
Give meter time to adjust to
current conditions
Ports blocked
Remove obstruction from
front and/or rear ports
Direct sunlight
Move from direct sunlight
Fan popped out
Impact to fan area
Align notch and groove on
circumference. Press back
in.
Screw port doesn’t work
Wrong thread size/type
Ensure accessory has a
¼-20 threaded screw