Half-size CPU Card HSB-668I
Chapter 4 Driver Installation 4-3
4.1 Installation:
Insert the HSB-668I CD-ROM into the CD-ROM Drive. The
Autorun program will run automatically. You also can choose the
drivers to install from step 1 to step 3 in order as following
instructions.
Step 1 – Install VIA 4 in 1 Driver
1. Click on the VIA 4 IN 1 folder and double click on the
VIAHyperion4in1456v.exe
2. Follow the instructions that the window shows
3. The system will help you install the driver automatically
Step 2 – Install VGA Driver
1. Click on the VGA folder and select the OS your system is
2. Double click on the Setup.exe located in each OS folder
3. Follow the instructions that the window shows
4. The system will help you install the driver automatically
Step 3 –Install LAN Driver
1. Click on the LAN folder and the click on the Windows
folder
2. Double click on the Setup.exe
3. Follow the instructions that the window shows
4. The system will help you install the driver automatically
To Next Page
Loading...
