A&D BM-5 - Page 109

BM series 107
AD-1676: Tabletop breeze break (Medium)
A tabletop breeze break of a size best suited for the BM series balances.
Protects the balance from wind from sources such as air conditioning or people passing by,
thereby reducing balance weighing errors.
The transparent panel assembly consists of antistatic plastic material that protects the balance
from static electricity.
Sliding panels on the right and left side enable samples to be inserted or removed from each side.
368(W) x 514(D) x 350(H) mm (Including the handle)
AD-1682: Rechargeable Battery
This option allows use of the balance in a place where AC power is not available.
AD-1683: DC static eliminator
This static eliminator eliminates static electricity to prevent weighing errors caused by static
electricity during measurement.
This direct current and windless type of eliminator is the most suitable for precisely weighing powder, etc.
Small size, light weight
AD-1684A: Electrostatic field meter
This option measures the amount of the static charge on the sample, tare or peripheral
equipment and displays the result.
If those are found to be charged, discharge them using the AD-1683 DC static eliminator.
AD-1689: Tweezers for calibration weight
A pair of tweezers ideally suited for holding calibration weights of 1 g to 500 g.
AD-8529PC-W: Bluetooth converter (for connecting a personal computer)*
This option connects a personal computer to the balance wirelessly (via Bluetooth

) up to 10 m.
Driver installation is required.
AD-8529PR-W: Bluetooth converter (for connecting a printer)*
This option connects a printer to the balance wirelessly (via Bluetooth

) up to 10 m.
*Note on the AD-8529PC-W and AD-8529PR-W
The two products may require certification for compliance with local laws pertaining to radio
broadcast and equipment for wireless communication. Please refer to the A&D website for
countries where the products are already certified for use.
AX-SW137-PRINT: Foot switch print function with a plug
The foot switch has the same function as the PRINT key.
AX-SW137-REZERO: Foot switch rezero function with a plug
The foot switch has the same function as the RE-ZERO key.
AX-HOLDER-SET: Sample cup holder
Note This option cannot be used for the BM-5, BM-5D,
BM-20 and BM-22.
A set of holders to secure a sample cup such as
a test tube, centrifuge tube or micro tube.
Lar
g
e Medium Small
Sample cup holder used
as test tube stand
Sample cup holder used
as
h
o
l
de
r f
o
r mi
c
r
o
t
ube
C
entrifuge tube
secured slantingly