A&D EK-120A User Manual

Shows the balance display when all measurement modes are enabled.

Shows the balance display when specific measurement modes are disabled.

Illustrates an example of the display with a subset of enabled functions.

Describes the function of keys and indicators on the balance's front panel.

Details the power switch, DC input socket, and calibration switch on the side.

Explains the output connectors, battery charge switch, and security point.

Instructions for carefully unpacking the balance and checking contents.

Information on AC adapter usage, DC power sources, and battery charging modes.

Step-by-step guide for replacing the internal fuse if the display is blank.

Recommendations for choosing an appropriate, stable, and vibration-free location.

Detailed procedure for calibrating the balance using standard weights.

Steps for turning on the balance and performing a standard weighing.

How to add material to reach a specific target weight.

How to remove a specified amount of material from a container.

How to use the balance for percentage calculations.

How to use the balance for counting pieces or parts.

Instructions for connecting and using an optional printer.

Procedure for determining relative density using the underhook accessory.

Details on connecting the balance to a computer or printer via RS-232C.

Lists and describes optional accessories available for the EK series balances.

Explains the various weight units used by the EK series balances.