Need help?Do you have a question about the A&D EK-12Ki and is the answer not in the manual?
General| Capacity | 12 kg |
|---|---|
| Readability | 0.1 g |
| Platform Size | 170(W) x 133(D) mm |
| Display Type | LCD |
| Power Supply | AC adapter (included) |
| Calibration | External calibration |
| Auto Power Off | Yes |
| Overload Capacity | 15 kg |
Instructions for placing the balance, adjusting the level, and initial calibration.
Details on using the AC adapter or the optional rechargeable battery pack.
Procedure for powering the balance on and off, including auto-power off.
Information on automatic backlight behavior and settings for always on/off.
Description of available units, conversion table, and how to select units.
Procedure for selecting the desired weighing unit using the MODE key.
Step-by-step guide for weighing an object, including taring and reading the value.
Explanation of the three weighing ranges and selection methods (auto, manual, fixed).
Determines the number of objects using basic unit weight and sample count.
Displays weighing value as a percentage relative to a reference (100%) weight.
Step-by-step guide to set the comparator mode and data comparison conditions.
Procedure for calibrating the balance using a specific calibration weight.
Adjusts balance for gravity variations without a calibration weight.
Description of the function of each key on the balance.
Procedure to access and navigate the balance's function setting menus.
Example demonstrating how to set auto power-off and ACAI functions.
Procedure to select and store preferred weighing units for display.
Comprehensive list of available functions, parameters, and their descriptions.
Details on transmission system, format, baud rate, and pin connections for RS-232C.
Description of data headers, units, terminator, and output data examples.
Explanation of Stream, Key, and Auto-print modes for data output.
How to control the balance using computer commands (e.g., request weight, zero, change unit).
Procedure for setting an ID number for GLP data identification.
Details on printing GLP reports (calibration, calibration test) in AD-8121 or general format.
Provides HI, OK, or LO signal outputs as solid state relay outputs, with optional buzzer.
Assembly for weighing large objects in suspension or measuring specific gravity.
Ni-MH battery pack for cordless operation, offering approximately 9 hours of use.
Carrying case for convenient transport of the balance.
Important guidelines for balance maintenance, avoiding disassembly and using proper cleaning methods.
List and explanation of common error codes and their meanings.
Detailed specifications including model, capacity, display, and operating conditions for EK-i models.
Detailed specifications including model, capacity, display, and operating conditions for EW-i models.
Capacity and minimum display for various units across different models.
Diagrams showing the physical dimensions of the balance models.
To Next Page
