A&D EK-410i User Manual

x
1WMPD4000465B

A&D EK-410i Specifications

General

Brand	A&D
Model	EK-410i
Category	Scales
Language	English

Summary

1. INTRODUCTION

2. UNPACKING

3. PART NAMES AND FUNCTIONS

4. SETTING UP

4-1. Setting up your balance

Guidance on placing, leveling, and preparing the balance for use.

4-2. Power source

Details on using the AC adapter and rechargeable battery pack.

5. OPERATION

5-1. Turning the power ON and OFF

Steps to turn the balance on and off, including auto-power off.

5-2. LCD backlight

Explanation of the LCD backlight behavior and settings.

5-3. Units

Lists and explains available weighing units and their conversion to grams.

5-4. Selecting a weighing unit

How to switch between different weighing units using the MODE key.

5-5. Basic operation

Step-by-step guide for performing basic weighing operations.

5-6. Weighing range for the EW-i series

Explains the different weighing ranges and how to select them.

5-7. Counting mode (pcs)

Detailed steps for using the counting mode, including sample unit storage.

5-8. Percent mode (%)

Guide on using the percent mode to display values relative to a reference weight.

6. COMPARATOR

6-1. Setting example

Step-by-step example of setting up the comparator function.

7. CALIBRATION

7-1. Calibration using a weight

Procedure for calibrating the balance using a calibration weight.

7-2. Gravity acceleration correction

How to adjust for gravity variations when a calibration weight is unavailable.

8. FUNCTIONS

8-1. Key operation

Overview of key functions and their actions in different modes.

8-2. Entering the function setting mode

How to access the balance's function setting menu.

8-3. Setting example

Example of how to configure specific functions like auto power-off and ACAI.

8-4. Storing weighing units

Guide to selecting and storing preferred weighing units for display.

8-5. Function list

Comprehensive list of available functions, parameters, and their descriptions.

9. RS-232C SERIAL INTERFACE

9-1. Interface specifications

Technical details of the RS-232C interface, including pinouts and data format.

9-2. Data format

Explanation of the data structure and units transmitted via the serial interface.

9-3. Data output mode

Describes different modes for outputting data via RS-232C.

9-4. Command mode

Details on controlling the balance remotely using computer commands.

10. ID NUMBER AND GLP

10-1. Setting the ID number

How to assign an ID number for GLP reporting.

10-2. GLP report

Instructions for generating calibration and GLP reports.

11. OPTIONS

11-1. OP-04 Comparator relay output and buzzer

Details on the OP-04 option for comparator output and buzzer functionality.

11-2. OP-07 Underhook assembly

Information about installing the underhook assembly for weighing suspended items.

11-3. OP-09 Rechargeable battery pack (Ni-MH)

Instructions for charging and using the rechargeable battery pack.

11-4. OP-12 Carrying case

Description of the carrying case for portability.

12. MAINTENANCE

12-1. Notes on maintenance

General guidelines for maintaining the balance and avoiding damage.

12-2. Error codes

Lists and explains various error codes and their meanings.

13. SPECIFICATIONS

13-1. EK-i series

Detailed specifications for the EK-i series of balances.

13-2. EW-i series

Detailed specifications for the EW-i series of balances.

13-3. Other weighing units

Capacity and minimum display values for various units across models.

13-4. Dimensions

Physical dimensions of the EK-i and EW-i series balances.

GRAVITY ACCELERATION MAP

World map

Company Information