Need help?Do you have a question about the A&D EK-600i and is the answer not in the manual?
General| Maximum Capacity | 600 g |
|---|---|
| Calibration | External |
| Display | LCD |
| Interface | RS-232C |
| Auto Power Off | Yes |
| Power Supply | AC adapter |
| Weighing Units | g, oz, lb, ct |
Check all items included when unpacking the balance for operation.
Place the weighing pan, adjust leveling feet, and calibrate the balance before use.
Use the AC adapter or the optional rechargeable battery pack for power.
Instructions on how to turn the balance power ON and OFF, including auto-power off.
Details about how the LCD backlight turns on and off, and its settings.
Explanation of available weight units and how to select them.
Instructions on using the MODE key to select the desired weighing unit.
Step-by-step guide on how to weigh an object using the balance.
Explanation of the three weighing ranges and how to select automatic, manual, or fixed ranges.
How to use the balance for counting mode, including storing sample units.
How to use the balance for percent mode, including storing the reference weight.
A step-by-step example of how to set the comparator function and limits.
Detailed procedure for calibrating the balance using a calibration weight.
How to correct for gravity acceleration if calibration weight is unavailable.
Explanation of the function of each key on the balance.
How to access the balance's function setting mode.
A step-by-step example of setting auto power-off and ACAI functions.
How to select and store the weighing units that will be used.
A comprehensive list of all available functions, parameters, and their descriptions.
Technical details of the RS-232C interface, including data format and pin connections.
Explanation of the data structure, headers, units, and terminator for serial output.
Description of different data output modes like stream, key, and auto-print.
Details on how to control the balance using commands from a computer.
How to set an ID number for the balance for GLP data.
How to print GLP reports (calibration and calibration test) via printer or computer.
Details on the OP-04 option for comparator output and buzzer functionality.
Information on the OP-07 underhook assembly for weighing suspended objects.
Details about the OP-09 rechargeable battery pack, including charging and usage.
Information about the OP-12 carrying case for portability.
General guidelines and precautions for maintaining the balance.
Explanation of various error codes displayed by the balance and their meanings.
Detailed specifications for the EK-i series of balances.
Detailed specifications for the EW-i series of balances.
Specifications for various units like oz, lb, ozt, ct, mom, dwt, GN, and tl.
Diagrams showing the physical dimensions of the EK-i and EW-i series balances.
To Next Page
