A&D EK-610i User Manual

x
1WMPD4000465B

A&D EK-610i Specifications

General

Model	EK-610i
Category	Scales
Capacity	610 g
Readability	0.1 g
Calibration	External
Display	LCD
Auto Power Off	Yes
Weighing Units	g, oz, ozt, dwt, ct
Power	6V
Power Supply	AC adapter (included) or 4 x AA batteries (not included)

Summary

COMPLIANCE WITH FCC RULES

1. INTRODUCTION

2. UNPACKING

3. PART NAMES AND FUNCTIONS

Product Overview and Components

Identifies key physical parts, ports, and the LCD display of the balance.

Key Operation and Controls

Explains the function of each key on the balance for user interaction.

4. SETTING UP

4-1. Balance Setup and Location

Instructions for properly placing the balance and preparing it for use.

4-2. Power Source Options

Details on using the AC adapter or rechargeable battery pack for operation.

5. OPERATION

5-1. Power ON/OFF and Auto-Off

Procedure for powering the balance on and off, including auto-power off function.

5-2. LCD Backlight Control

Explains how the LCD backlight functions and its operational settings.

5-3. Weighing Unit Selection

Unit Conversion Table

Lists conversion factors for different weighing units to grams.

5-4. Selecting a Weighing Unit

5-5. Basic Weighing Procedure

Operational Precautions

5-6. EW-i Series Weighing Ranges

5-7. Counting Mode (pcs)

Counting Objects and ACAI

Steps for counting items and using the ACAI function for improved accuracy.

5-8. Percent Mode Calculation

6. COMPARATOR FUNCTION

Comparator Results and Conditions

Explains how comparison results (HI, OK, LO) are indicated and operating settings.

6-1. Setting Comparator Modes

A practical demonstration of how to configure the comparator settings.

Setting Upper and Lower Limit Values

7. CALIBRATION PROCEDURES

7-1. Calibration Using a Weight

Step-by-step guide for calibrating the balance with a standard calibration weight.

Performing Zero-Point Calibration

7-2. Gravity Acceleration Correction

8. ADVANCED FUNCTIONS

8-1. Key Operation in Functions

Overview of how each key functions within different operational modes.

8-2. Accessing Function Settings

Instructions on accessing and navigating the balance's configuration menu.

8-3. Example Function Settings

8-4. Storing Preferred Weighing Units

8-5. Comprehensive Function List

Function List Details

9. RS-232C SERIAL INTERFACE

9-1. Interface Specifications

Technical details of the RS-232C interface, including baud rate and data format.

9-2. Data Format Structure

9-3. Data Output Modes

9-4. Command Mode Operation

10. ID NUMBER AND GLP

10-1. Setting the ID Number

Procedure for assigning a unique ID for GLP reporting.

10-2. GLP Report Generation

Calibration Test Report Mode

11. OPTIONS

11-1. OP-04 Comparator Relay and Buzzer

Details the optional output for comparator results and buzzer functionality.

11-2. OP-07 Underhook Assembly

11-3. OP-09 Rechargeable Battery Pack

11-4. OP-12 Carrying Case

12. MAINTENANCE

12-1. Maintenance Notes

General guidelines and warnings regarding balance maintenance and cleaning.

12-2. Error Code Explanations

Lists and explains common error codes displayed by the balance.

Error Code Explanations (Cont.)

13. SPECIFICATIONS

13-1. EK-i Series Specifications

Detailed technical specifications for all EK-i models.

13-2. EW-i Series Specifications

13-3. Specifications in Other Units

13-4. Physical Dimensions

GRAVITY ACCELERATION MAP

Gravity Values at Various Locations

A table listing gravity acceleration values for different geographical locations worldwide.

World Map