A&D EK-1200A User Manual

Controls the re-zeroing function for tare weight compensation.

Used for sample input in counting and percentage modes.

Switches between different weighing units and functions.

Shows the currently selected weight unit notation.

Indicates when the weight reading is stable and not changing.

Displays negative values, e.g., for weighing out.

Shows the status of Automatic Counting Accuracy Improvement.

Activates or deactivates the balance power supply.

Port for connecting the AC/DC adapter.

Accesses the balance calibration mode.

Interface for connecting printers or computers.

Controls trickle or fast charging for the battery pack.

Feature to secure the balance against theft.

Procedure for unpacking and checking included items.

Details power sources and voltage compatibility.

Instructions for replacing the internal fuse.

Guidelines for choosing an optimal operating location.

Step-by-step guide to calibrate the balance accurately.

Basic procedure for performing weight measurements.

Method for adding material to reach a specific weight.

Method for removing material to a specified target weight.

How to calculate and display weights as percentages.

Procedure for counting multiple identical items.

Connecting and using an optional printer.

Performing weighings below the balance pan.

Specifications and use of serial data communication.

List and description of available optional accessories.