Do you have a question about the A&D EK-2000i and is the answer not in the manual?
Lists the items to check when unpacking the balance.
Explains the functions of ON/OFF, MODE, RE-ZERO, PRINT, and SAMPLE keys.
Instructions for balance installation, leveling, and optimal location.
Details on using the AC adapter or rechargeable battery pack for power.
Guide for powering the balance on/off and managing the LCD backlight.
Details available weighing units and how to select them.
Steps for basic weighing and essential operational safety advice.
Explains weighing range, counting mode (pcs), and percent mode (%) operation.
Understanding comparison results (HI/OK/LO) and setting comparison modes.
How to input upper and lower limit values for comparison.
Steps for calibrating the balance using a weight or gravity correction.
How to enter the function setting mode and overview of key operations.
Examples and steps for setting auto power-off, ACAI, and storing units.
Detailed list of available functions, parameters, and their descriptions.
Technical specifications and connection details for the RS-232C interface.
Explains data formats, stream, key, and auto-print modes for data output.
How to control the balance using commands from a computer via RS-232C.
Assigning an ID number and understanding GLP data transmission.
Procedures for generating calibration and calibration test reports.
How to output GLP 'Title block' and 'End block'.
Introduction to available optional accessories for the balance.
Details on the OP-04 Comparator relay output and buzzer option.
Information on the OP-07 Underhook assembly for weighing suspended items.
Details on the OP-09 rechargeable battery pack and OP-12 carrying case.
Guidelines for maintaining the balance and avoiding damage.
Explanation of error codes and steps to resolve them.
Troubleshooting for CAL errors, low battery, AC adapter, and stability issues.
Technical data including capacity, display, and performance for EK-i models.
Technical data including capacity, display, and performance for EW-i models.
Details on units other than grams and physical dimensions of balances.