A&D EK-600H User Manual

Steps for physically setting up the balance, including leveling and pan placement.

Details on using the AC adapter and the optional NiCd battery pack for power.

Procedure for turning the balance power on and placing it in standby mode.

How to turn the balance display on and off while power is connected.

Explanation of available weighing units and their conversions.

Instructions on how to use the MODE key to select different units.

Step-by-step guide for performing basic weighing, including taring.

Guide to using the balance for counting items by unit weight.

How to use the percent mode to compare weights against a reference.

Using the hold function to stabilize and display average weights of moving items.

Detailed steps for calibrating the balance using a calibration weight.

Explanation of how different keys are used for various operations and modes.

Procedure to enter the balance's function setting mode using the SAMPLE key.

Demonstrates setting balance response and refresh rate.

How to save preferred weighing units for faster selection.

A comprehensive list of all available functions and their parameters.

Procedure to reset balance parameters to factory default settings.

Settings to lock or unlock balance parameter adjustments.

Example of setting continuous comparison with reference value and tolerance.

Example of setting continuous comparison with upper/lower limits.

Example of setting comparison at stable value with upper/lower limits.

How to assign an ID number for balance identification in GLP data.

Procedure to test the balance's calibration accuracy.

Illustrates sample data formats for calibration and calibration tests.

General guidelines for maintaining the balance and important warnings.

Explanation of error codes and how to resolve them.