Need help?Do you have a question about the A&D EK-12KA and is the answer not in the manual?
Key used to re-zero display for container weight.
Key used to enter sample weight for counting/percentage.
Key used to switch weighing unit of display.
Displays selected weight unit notation.
Circle indicates stable display and no weight motion.
Shows loss in weight from a zero point.
Indicator for counting averaging function.
Activates and deactivates balance power.
Input socket for AC/DC adapter.
Switch to enable calibration mode.
Connects balance to printer or computer via RS-232C.
Switch for battery charging modes (TRI/FULL).
Point to secure balance or connect anti-theft alarm.
Procedure for carefully unpacking the balance and checking contents.
Details on AC adapter and alternative 12V DC power sources.
Instructions for replacing blown internal DC fuse.
Guidelines for choosing an optimal and stable operating environment.
When and how to perform balance calibration.
Basic steps for weighing an object.
Procedure to add material until a target weight is reached.
Procedure to remove a specified amount of material.
How to calculate weights in terms of percentages.
Using the balance to count pieces or parts.
Connecting and using the optional printer.
Procedure for underhook weighing to determine relative density.
Specifications and data format for RS-232C communication.
Details on optional accessories like battery packs and interface boards.
Definitions and conversions for various weighing units.
To Next Page
General
