Need help?Do you have a question about the A&D EK-3000i and is the answer not in the manual?
General| Capacity | 3000 g |
|---|---|
| Readability | 0.1 g |
| Calibration | External calibration |
| Display | LCD |
| Interface | RS-232C |
| Power Supply | AC adapter |
| Units of Measurement | g, oz |
Explains the function of each key on the balance, including ON/OFF, MODE, RE-ZERO, PRINT, and SAMPLE.
Details on placing the balance correctly and considerations for environmental conditions.
Information on using the AC adapter or the rechargeable battery pack for power.
Instructions for switching the balance on and off, including the auto-power off feature.
Details on how the LCD backlight operates and settings to control its behavior.
Step-by-step guide to configure comparator settings, including upper and lower limit values.
Detailed steps for performing calibration with a calibration weight.
Explanation of the function of each key for navigating balance operations and settings.
Procedure to enter the function setting mode to configure various balance parameters.
Technical specifications for the RS-232C interface, including data format and pin connections.
Step-by-step guide to assign an ID number for balance identification in GLP reports.
Description of the OP-04 option, its functionality, and maximum ratings.
Information on the OP-07 underhook assembly for weighing heavy or suspended items.
Important precautions regarding balance maintenance, cleaning, and repair.
Explanation of various error codes and steps to resolve them.
Table listing models, capacities, display resolutions, and other technical details for EK-i balances.
Table detailing specifications for EW-i series balances, including capacity and display resolution.
To Next Page
