Need help?Do you have a question about the A&D EK-6000i and is the answer not in the manual?
General| Capacity | 6000 g |
|---|---|
| Readability | 0.1 g |
| Calibration | External Calibration |
| Display | LCD |
| Repeatability | 0.1 g |
| Linearity | ±0.2 g |
| Interface | RS-232C |
| Power Supply | AC adapter or batteries |
| Weighing Units | g, oz, lb |
Explains the manual's purpose and features of EK-i/EW-i balances.
Guides on verifying all included items after unpacking the balance.
Guides on positioning, leveling the balance using the spirit level, and initial calibration.
Details using the AC adapter and the optional rechargeable battery pack for balance operation.
Instructions for turning the balance power on/off, including auto-power off feature.
Explains LCD backlight operation and its configurable settings.
Step-by-step guide to configure balance for various comparison modes and settings.
Step-by-step instructions for calibrating the balance with a calibration weight.
Describes the primary function of each key on the balance interface.
Guides on entering the function setting mode and navigating through setting classes.
Details technical specifications of RS-232C interface, including data format and pin connections.
Step-by-step guide to assign a unique ID number to the balance for GLP data.
Details OP-04 option for external signal output and buzzer functionality.
General guidelines and precautions to follow when maintaining the balance.
Comprehensive technical data for all models in the EK-i series.
To Next Page
