Need help?Do you have a question about the A&D EK-300i and is the answer not in the manual?
General| Model | EK-300i |
|---|---|
| Capacity | 300 g |
| Readability | 0.01 g |
| Calibration | External Calibration |
| Interface | RS-232C |
| Weighing Units | g, oz, lb |
| Power Supply | AC adapter (included) |
| Operating Temperature | 5 °C to 40 °C |
Overview of the manual and the features of the EK-i and EW-i series electronic balances.
Identifies and explains the various parts of the balance, including the LCD display and operational keys.
Instructions for proper balance placement and leveling to ensure accurate measurements and stability.
Details on connecting the AC adapter or using the optional rechargeable battery pack for power.
Procedures for turning the balance on and off, and information on the auto-power off function.
Describes the behavior and settings of the LCD backlight for optimal visibility in different lighting conditions.
Lists available weighing units, provides a conversion table, and explains how to select and store preferred units.
Step-by-step guide for weighing objects, including taring and important operational precautions.
Instructions for using the counting mode to determine the number of pieces in a sample, including ACAI function.
How to use the percent mode to display weighing values as a percentage of a reference weight.
A practical example demonstrating how to set up the comparator function and its limits.
Detailed instructions for performing calibration using a calibration weight and gravity correction.
Explains the primary functions of each key on the balance unit and how to enter function settings.
A comprehensive table detailing all available functions, their parameters, and descriptions for configuration.
Technical specifications for the RS-232C serial interface, including data format, modes, and pin connections.
Describes the structure and types of data transmitted via the RS-232C interface for output to external devices.
Procedure for setting an identification number for GLP data logging and generating GLP reports.
Details on optional accessories like the comparator relay output, battery pack, and carrying case.
A list and explanation of various error codes that may appear on the balance display and troubleshooting steps.
Detailed technical specifications for all models in the EK-i series, including capacity, display, and environmental limits.
Detailed technical specifications for all models in the EW-i series, including capacity, display, and environmental limits.
Diagrams illustrating the physical dimensions and measurements of the balance units for installation and space planning.
A map displaying gravity acceleration values for various global locations, useful for calibration adjustments.
To Next Page
