A&D EK-1200i User Manual

x
1WMPD4000465B

A&D EK-1200i Specifications

General

Brand	A&D
Model	EK-1200i
Category	Scales
Language	English

Summary

COMPLIANCE WITH FCC RULES

INTRODUCTION

UNPACKING

PART NAMES AND FUNCTIONS

ON/OFF Key

Turns the power on or off.

RE-ZERO Key

Clears the display to zero.

SAMPLE Key

Enters function setting or sample storing mode.

SETTING UP

4-1. Setting up your balance

Instructions for placing and leveling the balance for accurate measurement.

4-2. Power source

Details on using the AC adapter or rechargeable battery pack.

OPERATION

5-1. Turning the power ON and OFF

Procedure for switching the balance on and off, including auto-power off.

5-2. LCD backlight

Explanation of how the LCD backlight operates and its settings.

Units

Selecting a weighing unit

Basic operation

Weighing range for the EW-i series

Counting mode (pcs)

Percent mode (%)

COMPARATOR

6-1. Setting example

Step-by-step guide to setting up the comparator function.

CALIBRATION

7-1. Calibration using a weight

Procedure for calibrating the balance using a calibration weight.

Gravity acceleration correction

FUNCTIONS

8-1. Key operation

Explanation of the function of each key during operation.

8-2. Entering the function setting mode

How to access the balance's function setting menus.

Setting example

Storing weighing units

Function list

RS-232C SERIAL INTERFACE

9-1. Interface specifications

Technical details including transmission system, data format, and pinouts.

Data format

Data output mode

Command mode

ID NUMBER AND GLP

10-1. Setting the ID number

Procedure for assigning an ID number for Good Laboratory Practice (GLP) data.

GLP report

Calibration test report

Output of "Title block" and "End block"

OPTIONS

11-1. OP-04 Comparator relay output and buzzer

Details of the OP-04 option for comparator relay output and buzzer functionality.

OP-07 Underhook assembly

OP-09 Rechargeable battery pack (Ni-MH)

OP-12 Carrying case

MAINTENANCE

12-1. Notes on maintenance

General guidelines and precautions for maintaining the balance.

12-2. Error codes

Explanation of various error codes and their meanings for troubleshooting.

SPECIFICATIONS

13-1. EK-i series

Technical specifications for the EK-i series of balances.

EW-i series

Other weighing units

Dimensions

GRAVITY ACCELERATION MAP