A&D EK-200i User Manual

x
1WMPD4000465B

A&D EK-200i Specifications

General

Brand	A&D
Model	EK-200i
Category	Scales
Language	English

Summary

Compliance with FCC Rules

1. INTRODUCTION

2. UNPACKING

3. PART NAMES AND FUNCTIONS

ON/OFF key

Turns the power on or off.

MODE key

Switches the weighing unit or weighing mode.

RE-ZERO key

Clears the display to zero.

PRINT key

Outputs data, or enters settings.

SAMPLE key

Enters function setting mode or sample unit storing mode.

4. SETTING UP

4-1. Setting up your balance

Instructions for physical setup, leveling, and initial calibration.

4-2. Power source

Explains how to connect the AC adapter or use the rechargeable battery pack.

5. OPERATION

5-1. Turning the power ON and OFF

Procedure for switching the balance on and off, including auto-power off.

5-2. LCD backlight

Details how the LCD backlight operates and its settings.

5-3. Units

Explains available weighing units and how to select them.

5-4. Selecting a weighing unit

Instructions on how to cycle through and select different weighing units.

5-5. Basic operation

Step-by-step guide for performing basic weighing, including taring.

5-6. Weighing range for the EW-i series

Describes the three weighing ranges and settings for automatic, manual, or fixed range selection.

5-7. Counting mode (pcs)

Explains how to use the counting mode, store unit weights, and count objects.

5-8. Percent mode (%)

Details how to use the percent mode, store reference weight, and read percentages.

6. COMPARATOR

6-1. Setting example

Provides an example of how to set the comparator mode and limits.

7. CALIBRATION

7-1. Calibration using a weight

Step-by-step guide to calibrate the balance using a calibration weight.

7-2. Gravity acceleration correction

Explains how to perform gravity acceleration correction when a calibration weight is unavailable.

8. FUNCTIONS

8-1. Key operation

Explains the function of each key in different modes.

8-2. Entering the function setting mode

Procedure to access and navigate the balance's function setting menus.

8-3. Setting example

Demonstrates how to set specific functions like auto power-off and ACAI.

8-4. Storing weighing units

Instructions for selecting and storing preferred weighing units.

8-5. Function list

A comprehensive list of all available functions, parameters, and their descriptions.

9. RS-232C SERIAL INTERFACE

9-1. Interface specifications

Covers transmission system, data format, and pin connections for RS-232C.

9-2. Data format

Explains the structure and content of data transmitted via RS-232C.

9-3. Data output mode

Describes different data output modes: Stream, Key, Auto-print.

9-4. Command mode

Details how to control the balance remotely using commands from a computer.

10. ID NUMBER AND GLP

10-1. Setting the ID number

Procedure for assigning an ID number to the balance for GLP.

10-2. GLP report

Instructions for printing or transmitting calibration and GLP reports.

11. OPTIONS

11-1. OP-04 Comparator relay output and buzzer

Details the OP-04 option for comparator output signals and buzzer functionality.

11-2. OP-07 Underhook assembly

Explains the OP-07 underhook assembly for weighing suspended items.

11-3. OP-09 Rechargeable battery pack (Ni-MH)

Information on the rechargeable battery pack, its charging, and usage.

11-4. OP-12 Carrying case

Description of the optional carrying case for balance portability.

12. MAINTENANCE

12-1. Notes on maintenance

Important precautions regarding balance maintenance and cleaning.

12-2. Error codes

Lists and explains various error codes and their meanings.

13. SPECIFICATIONS

13-1. EK-i series

Technical specifications including capacity, display, and operating conditions for EK-i models.

13-2. EW-i series

Technical specifications including capacity, display, and operating conditions for EW-i models.

13-3. Other weighing units

Details capacity and minimum display for various units across different models.

13-4. Dimensions

Provides physical dimensions for different balance models.

GRAVITY ACCELERATION MAP