A&D FG-150KAM - Compliance; Introduction

4
1. COMPLIANCE
Compliance with FCC Rules
Please note that this equipment generates, uses and can radiate radio frequency
energy. This equipment has been tested and has been found to comply with the limits
of Class A digital devices pursuant to Part 15 of FCC rules. These rules are designed
to provide reasonable protection against interference when equipment is operated in a
commercial environment. If this unit is operated in a residential area, it may cause
some interference and under these circumstances the user would be required to take,
at his own expense, whatever measures are necessary to eliminate the interference.
(FCC = Federal Communications Commission in the U.S.A.)
2. INTRODUCTION
This manual describes how this scale works and how to get the most out of it in terms of
performance.
FG series platform scales have the following features:
 The FG series has three kinds of weight display resolution, 1/3,000, 1/6,000
(1/7,500) and 1/12,000 (1/15,000).
 There are 2 sizes of weighing pan. The FG-KAL has a larger pan and the FG-
KAM/KBM has a smaller pan. The FG-KAL/KAM has a display column and the FG-
KBM is a without column model. You can select a model that suits your own
application.
 As power source, you can use an AC adapter or C size dry batteries.
 The counting function easily counts the number of articles of the same weight.
 The comparator function compares the display value with upper limit and lower limit.
The display shows the result and the optional FG-24 can output it as a relay signal.
 The optional FG-23 and FG-24 has an RS-232C interface and can output the
weighing data to connect with a printer, computer and so on.