What does parameter setting error mean on A&D Scales?
A parameter setting error on A&D Scales means the received data exceeds the range that the balance can accept. To resolve this, confirm the parameter range of the command.
What causes automatic response adjustment zero error on A&D Scales?
The automatic response adjustment zero error on A&D Scales indicates that there is something on the pan. Clear the pan and press the CAL key to return to the weighing mode.
What does excess characters error mean on A&D Scales?
An excess characters error on A&D Scales means the balance received excessive characters in a command. Confirm the command to resolve this issue.
How to resolve undefined command error on A&D GX-4000?
To resolve an undefined command error on A&D Scales, confirm the command you are trying to execute.
What to do for unit mass error on A&D GX-4000 Scales?
If you encounter a unit mass error on your A&D Scales, add samples to reach the specified number and then press the PRINT key.
What to do if A&D GX-4000 Scales show sample mass error?
If your A&D Scales display a sample mass error, it suggests that the sample is too small. Use a larger sample to resolve this issue.
General| Calibration | External Calibration |
|---|---|
| Power Supply | AC adapter (included) |
| Units of Measurement | g, oz, ozt, dwt, ct, gn, tl |
| Interface | RS-232C |
| Auto-off | Yes |
Explains the manual's structure and content overview.
Lists the main functionalities and capabilities of the GX series balance.
Details compliance with FCC and EMC directives for safe operation.
Step-by-step guide for carefully unpacking the balance and its components.
Instructions for properly setting up the balance on a stable surface.
Guidelines for optimal placement and preparation before operating the balance.
Best practices and safety measures to follow during weighing.
Procedures for handling after use and details on power supply connection.
Explains the meaning of various display indicators on the balance.
Details the function of each key when pressed or held during operation.
Lists available weighing units and their corresponding conversion factors.
Instructions on selecting and storing weighing units in the function table.
Step-by-step guide for performing basic weighing operations in gram mode.
Instructions for using the counting mode to determine the number of objects.
Guide to using the percent mode for target weighing or sample variability.
How to use the hold function for weighing moving objects like animals.
Automatic adjustment of response and self-check of balance performance.
Procedure for manually adjusting the balance's response characteristics.
Overview of calibration modes: auto, internal mass, and external weight.
How the balance automatically calibrates with temperature changes.
Step-by-step guide for calibrating using the balance's internal mass.
Instructions for calibrating the balance with an external weight.
Procedure for testing balance accuracy using an external weight.
How to adjust the internal mass value to match an external weight.
How to permit or inhibit access to specific balance functions for security.
Steps to reset balance parameters to their factory default settings.
Explains the hierarchical structure (Class/Item) of the function table.
Details display symbols and key functions within the function table.
Comprehensive breakdown of function table items, parameters, and descriptions.
Explains parameters related to environment settings and display behavior.
Details various modes and formats for outputting weighing data.
Provides visual examples of different data output formats.
How to set and use the balance's internal clock and calendar.
How to configure and use the comparator function for limit checks.
How to assign an ID number to identify the balance for GLP reporting.
Details on generating and outputting GLP calibration and test reports.
Important considerations and procedures for using the data memory function.
How to store and manage weighing data in the balance's memory.
How to store calibration and calibration test data in memory.
How to store and recall unit mass data for counting operations.
Instructions for connecting and configuring the AD-8121B printer.
Guidance on connecting the balance to a personal computer.
How to use WinCT software for balance communication and data analysis.
Lists commands for querying data and controlling balance functions via RS-232C.
Explains acknowledge codes and error codes received from the balance.
Illustrates common command operations with the balance.
How CTS and RTS signals control communication flow.
Configuration settings for RS-232C communication.
Steps to diagnose issues with balance performance or operating environment.
Lists and explains various error codes displayed by the balance.
Guidance on when and how to seek professional repair services.
To Next Page
