What to do if A&D Scales show an overload error?
If your A&D Scales display an overload error, it means the weight on the pan exceeds the maximum capacity. Remove the sample from the pan to resolve this issue.
How to fix stability error on A&D Scales?
A stability error on A&D Scales typically arises from environmental factors. To resolve this, prevent any vibration, drafts, temperature changes, static electricity, and magnetic fields around the scales. You can also adapt the balance to the environment.
What causes calibration weight error on A&D Scales?
A calibration weight error on A&D Scales occurs when the calibration weight is either too heavy or too light. Confirm the correct calibration weight value. Press the CAL key to return to the weighing mode.
Why am I getting a communications error on my A&D GX-6000?
A communications error on A&D Scales indicates a protocol error during communication. To fix this, confirm the correct format, baud rate, and parity settings.
What to do if A&D GX-6000 Scales show weighing pan error?
If your A&D Scales display a weighing pan error, ensure that the weighing pan is correctly installed. After confirming its installation, calibrate the balance.
What does timeout error mean on A&D GX-6000?
A timeout error on A&D Scales means the balance didn't receive the next character of a command within one second. Confirm the communication to resolve this.
Why A&D GX-6000 Scales show automatic response adjustment unstable error?
The automatic response adjustment unstable error on A&D Scales indicates that the weight value is unstable. Check for ambient conditions such as breeze, vibration, and magnetic fields, and also inspect the weighing pan. Press the CAL key to return to the weighing mode.
What does internal mass error mean on A&D GX-6000 Scales?
An internal mass error on A&D Scales means that applying the internal mass does not yield a change in the weighing value as specified. Confirm that there is nothing on the pan and perform the weighing operation from the beginning again.
What does format error mean on A&D Scales?
A format error on A&D Scales indicates that a command includes incorrect data. To fix this, confirm the command you are using.
How to fix clock battery error on A&D GX-6000 Scales?
If your A&D Scales display a clock battery error, it means the clock backup battery has been depleted. Press any key and set the time and date to resolve this.
General| Readability | 0.01 g |
|---|---|
| Calibration | External |
| Display | LCD |
| Repeatability | 0.01 g |
| Operating Temperature | 5°C to 40°C |
| Interface | RS-232C |
| Auto-off | Yes |
| Power Supply | AC adapter |
| Weighing Units | g, oz, ozt, dwt, ct, gn, tl |
| Stabilization Time | 1.5 seconds (typical) |
| Units | g, oz, ozt, dwt, ct, gn, tl |
To Next Page
