A&D UC-352BLE - Ensuring a good connection

E-13
Other Functions
Ensuring a good connection
• Ensure the space between this scale and the receiver is unobstructed. The
communication distance may be shortened due to the building construction or
other obstructions. In particular, communication may not be possible through
reinforced concrete walls, etc.
• Do not use the Bluetooth
®
connection near a wireless LAN or other wireless
equipment, near devices that emit electro-magnetic waves such as microwave
ovens, locations that have a large number of obstructions, or other poor
environments for radio waves. It may cause the connection to be frequently
interrupted, communication speeds to drop substantially, and errors to occur.
• If the scale does not communicate properly when used near a wireless device or
broadcast station, change the location where it is used.
Caution
• The communication distance between this scale and the receiver is
approximately 32 feet or 10 meters. This distance may become shorter due
to the surrounding environment; therefore check that the distance is close
enough for data to be transmitted after the measurement.
Time Settings
This scale has a built-in clock. The date and time of measurement are included in
the measurement data. The clock is synced with the clock in the mobile device.
There is no need to set the clock on the scale.