A&S Mini Studio Bar 110 - Troubleshooting; Specifications

13
Troubleshooting
To keep the warranty valid, never try to repair the system yourself. If you encounter problems when
using this unit, check the following points before requesting service.
• No power
- Ensure that the AC cord of the apparatus is properly connected .
- Ensure that there is power at the AC outlet.
- Press standby button to turn the unit on.
• Remote control does not work
- Before you press any playback control button, rst select the correct source.
- Reduce the distance between the remote control and the unit.
- Insert the battery with its polarities (+/-) aligned as indicated.
- Replace the battery.
- Aim the remote control directly at the sensor on the front of the unit.
• I can’t nd the Bluetooth name of this unit on my Bluetooth device for Bluetooth
pairing
- Ensure the Bluetooth function is activated on your Bluetooth device.
- Ensure you have paired the unit with your Bluetooth device.
• This is a 15 mins power o function, one of the ERPII standard requirement for
saving power
- When the unit's external input signal level is too low, the unit will be turned o automatically in 15
minutes. Please increase the volume level of your external device.
Specications
Soundbar
Power Supply ..................................................................................................................................AC 220-240V~ 50/60Hz
Output Power ............................................................................................................................................................... 15 W x 2
Power Consumption .........................................................................................................................................................30 W
USB (SERVICE ONLY) ............................................................................................................................................5V==500mA
Frequency Response ......................................................................................................................................... 40Hz - 20KHz
Audio input sensitivity (AUX IN) .................................................................................................................................700mV
Speakers Impedance ....................................................................................................................................................... 8Ω x 2
Unit Dimension (L x W x H) ..................................................................................................................420 x 92 x 64.5 mm
Bluetooth
Version ......................................................................................................................................................................................V4.2
Maximum power transmitted ................................................................................................................................<20 dbm
Frequency bands ............................................................................................................................. 2402 MHz ~ 2480 MHz
Remote Control
Distance ......................................................................................................................................................................................6m
Angle .......................................................................................................................................................................................... 30°
Battery type ..................................................................................................................................................................... CR 2025