Aarcomm'Systems'Inc.' 18'Fawcett'Rd.,'Coquitlam,'B.C.,'V3K'6X9,'Canada' Page'5'
Telephone:''+1'(604)'265-8500' Email:''support@aarcomm.com' Rev.'3'
Antenna Installation Guide
Pull the antenna whip so that the bushing seats into the rubber insulator of the base-cap:
Thread the base-cap onto the antenna base, using a rubber washer only if the mounting surface is
less than 1.25 mm thick, then tighten another one-eighth to one-quarter of a turn. Note: If the
antenna whip feels loose to the touch, remove the rubber washer and/or adjust the bushing so that
the bottom end of the antenna whip protrudes further from the bushing.
To Next Page
Loading...