Aastra DT390 - Turn the Microphone On;Off During a Call; Start a New Call During Conversation; Switch between Calls; End a Call

PRELIMINARY
TD 92476EN
05 October 2012 / Ver. PG1
User Manual
Aastra DT390 DECT Telephone
20
4 Select "Call contact" for searching a local or company phonebook contact, or
select "Central phonebook" for searching a central phonebook contact.
5 Press "Select".
5.4.3 Turn the Microphone On/Off During a Call
1 Press "More" during the call.
2 Select "Microphone off".
3 Press "Select".
The indicate a silenced microphone. This means that the other part in an ongoing
call cannot hear you. To turn the microphone back on, do as follows:
1 Press "More" during the call
2 Select "Microphone on".
3 Press "Select".
It also possible to turn the microphone off/on by a long press on .
5.4.4 Start a New Call during Conversation
1 Press "More" during the call.
2 Select "New Call"
1
.
3 Press "Select".
4 Dial the number
5Press .
5.4.5 Switch Between Calls
A new call is started during conversation, the first call is on hold.
1 Press "More".
2 Select "Switch"
1
.
3 Press "Select". This will switch between the calls.
5.4.6 End a Call
A new call is started during conversation, the first call is on hold.
1 Press "More" during the call
2 Select "End Call"
1
.
3 Press "Select". This will end the current call and the previous call is resumed.
5.4.7 Transfer a Call
A new call is started during conversation, the first call is on hold.
1 Press "More".
2 Select "Transfer"
1
.
3 Press "Select". This will connect the first caller with the person you want to transfer
the call to.
1.Visible if defined in the PDM/CPDM3.