TD 92476EN
05 October 2012 / Ver. PG1
User Manual
Aastra DT390 DECT Telephone
34
Activate the Phone Lock
The handset can be protected for unauthorized use. If this function is activated, a PIN code
has to be entered for example to switch on the handset, to answer an incoming call etc.
The default phone lock code (0000) can be changed to any 4 - 8 digit personalized code.
If configured in the handset, it is possible to call a pre-defined emergency number while
the handset is locked. See Configuration Manual, Aastra DT390/DT69x DECT Telephones,
TD 92503EN.
1 Enter the menu by pressing the "Menu" soft key.
2 Select in the menu.
3 Select “Locks”.
4 Select “Auto phone lock”.
5 Select “On”, or "On in charger".
6 Enter PIN code.
7 Press "OK".
Deactivate the Phone Lock
1 Enter the menu by pressing the "Menu" soft key.
2 Select in the menu.
3 Select “Locks”.
4 Select “Auto phone lock”.
5 Select “Off”.
6 Enter PIN code
7Press "OK".
7.3.6 Answering
The default setting for the telephone is to use the Off-hook key when answering a call.
The answering behaviour can be configured to answer the call automatically, i.e. without
pressing a key, or/and in loudspeaking mode. It is also possible to set the answering
behaviour to any key. If "Any key" is selected, any keys except the "On-hook" key and the
"Sound off" key can be used to answer a call.
Answering key
The answering behaviour is by default set to Hook-off.
1 Enter the menu by pressing the "Menu" soft key.
2 Select in the menu.
3 Select "Answering key".
4 Select "Hook-off" or "Any key".
To Next Page
Loading...
