Aastra DT390 - Settings; Sound and Alert

PRELIMINARY
TD 92476EN
05 October 2012 / Ver. PG1
User Manual
Aastra DT390 DECT Telephone
31
7.3 Settings
7.3.1 Sound and Alert
Adjust the Ring Volume
1 Enter the menu by pressing the "Menu" soft key.
2 Select in the menu.
3 Select “Sound & Alerts”.
4 Select “Volume”.
5 Step with to increase/decrease the volume.
6 Press "OK" to save the setting.
Set different Ring Signals for Internal Call, External Call and Call Back
1 Enter the menu by pressing the "Menu" soft key.
2 Select in the menu.
3 Select “Sound & Alerts”.
4 Select “Ring signals”.
Different signals for internal calls, external calls and call back can be set.
5 Select "Internal call", "External call", or "Callback". The cordless telephone has 14
different ring signals.
6 Select sound. By pressing the Soft key "Play" it is possible to listen to the different
sounds.
7 Press "Back".
Turn the Vibrator on/off
1 Enter the menu by pressing the "Menu" soft key.
2 Select in the menu.
3 Select “Sound & Alerts”
4 Select “Vibrating alert”.
5 Select between “On”, “On if silent” (i.e. the vibrator is on when the telephone is
muted), or “Off”.
6 Press "Back".
Set the Key Sound
This means that every time a key is used, the telephone gives a small sound.
1 Enter the menu by pressing the "Menu" soft key.
2 Select in the menu.
3 Select “Sound & Alerts”.
4 Select “Key sound”.
5 Select between “Silent, “Click”, or “Tone”.
6 Press "Back".