Aastra DT390 - Change the Menu Language; Change Owner ID; In Charger

PRELIMINARY
TD 92476EN
05 October 2012 / Ver. PG1
User Manual
Aastra DT390 DECT Telephone
35
Answering behaviour
1 Enter the menu by pressing the "Menu" soft key.
2 Select in the menu.
3 Select “Answering”.
4 Select "Answering behaviour".
5 Select "Automatically" and/or "Loudspeaking".
6 Press "Change" to change the setting. The check box will be marked.
To remove the setting, select "Automatically" and/or "Loudspeaking", press "Change".
The check box will be unmarked.
7.3.7 Change the Menu Language
1 Enter the menu by pressing the "Menu" soft key.
2 Select in the menu.
3 Select “Language”.
4 Select the language to be used.
5 Press "Select" to save the setting.
Note: It is also possible to download an additional language to the telephone, see 9.1
Software Upgrade and Additional Features on page 41.
7.3.8 Change Owner ID
The Owner ID is set to identify the telephone.
1 Enter the menu by pressing the "Menu" soft key.
2 Select in the menu.
3 Select "Owner ID".
4 Enter identity.
5 Press "Save" to save the setting.
7.3.9 In Charger
Redirect Calls when Placed in Charger
Calls can be redirected to another extension
1
when the telephone is placed in a charger.
The function is automatically cancelled when the telephone is removed from the charger.
1 Enter the menu by pressing the "Menu" soft key.
2 Select in the menu.
3 Select “In charger”.
4 Select “Redirect”.
1.The extension number must be set in the PBX.