Aastra NeXspan 500 - Specifications and Performances; Specifications; Performances and Capacities

Page 11 01/2007 AMT/PTD/PBX/0062/1/2EN
♦ A single PARI number per IP DECT network
♦
♦
♦
♦
♦
♦
♦
♦
•
•
♦
♦
♦
♦
•
•
•
All the radio fixed parts on a DECT network have the same PARI
A DECT network may contain several DECT RFP clusters.
3.3 SPECIFICATIONS AND PERFORMANCES
3.3.1 SPECIFICATIONS
Frequency range used for the air interface (handset/radio fixed part): 1,880 – 1,900 GHz
(20 MHz bandwidth)
10 carrier frequencies (1,728 Mhz spacing), with 12 TS each
Throughput per channel: 32 kbit/s
Power: 10 mW.
3.3.2 PERFORMANCES AND CAPACITIES
Number of RFPs per DECT network: 256 RFPs maximum
RFP capacities
8 TS for voice
4 TS for signalling
Maximum number of handsets per DECT network, with OMM installed on an RFP: 512
handsets
Maximum number of handsets per DECT network, with OMM installed on a Linux server
PC: 1000 handsets
If the number of SIP DECT handsets is between 1000 and 4000, it is necessary to use
four OMMs, installed on four Linux server PCs.
The maximum number of managed handsets is 4000, limited by:
The Call server NCS capacity (4000 logical subscribers)
The declaration of these subscribers on the SIP gateway
1000 SIP DECT subscribers per OMM installed on a Linux server PC.