Page 25 01/2007 AMT/PTD/PBX/0062/1/2EN
3.11.2 CONFIGURING AN M90X MOBILE TERMINAL
3.11.2.1 REGISTERING AN M90X MOBILE TERMINAL
PRELIMINARY OPERATIONS
Check that the mobile is not already registered. To cancel the previous registration,
refer to the section “Cancelling the registration of an M90xx portable handset”
Check that the handset has been declared on the OMM interface (see the section
“Portable Parts”).
Check that the registration of the handset is authorised on the OMM interface
(Portable Part/Registration).
A. Check that the handset is not already duly registered.
The portable handset must not contain any "parasite" registrations (for example, from
previous use on another DECT system). In the standard case where the handset is to be
used on one DECT system only, it must not be registered on any other base at the
outset.
• At startup, if the handset displays:
Declare base number?
1 2 3 4 5 6 7 8 OK
it is not currently registered on any other base. Pressez alors sur la touche
OK
and proceed to step 7 under paragraph B).
If the mobile displays:
Mobile
Out of range
Redial Menu
it is already registered on at least one other base.
Press the Menu key. 1.
2.
3.
1.
2.
3.
4.
5.
Press the middle key. "Select base" is displayed
Press the Select base key.
• Any base numbers already in use are displayed. If they are used unduly, they must be
de-registered on the handsetErreur ! Aucun nom n'a été donné au signet..
B. Register the cordless handset on a base
Press the Menu key
Press the middle key. “Personalize” is displayed
Press the Personalize key
Press the middle or key several times until "Declare base" is displayed
Press the Declare base key
The handset display shows: "Declare base no. 1 2 3 4 5 6 7 8".
To Next Page
Loading...
