AAXA Technologies P7 - Remote & Keypad

Remote & Keypad
2
NOTE: Pressing power on the remote will only put the projector in STANDBY mode.
Toggle the “ON/OFF” switch on the side of the projector to fully turn the projector off.
Power On/Off
Select Source
Input Exit/Back
Direction Pad
Both the keypad and remote can be used to navigate through the menus. The Main Menu
Navigation on the remote functions exactly the same as the directional pad on the P7 unit.
On / Off
LED Lights
OK
Main Menu
Navigation
Media Player
Menu Navigation
Volume Up
Volume Down
Remote
Keystone
Adjustment
Keystone
Adjustment