25
Tip: You can set all the settings here by pressing ◄ /► button.
1. Menu Language: Set the menu language.
2. Audio1: Set the preferred audio
language.
3. Audio2: Set the sub-prime audio
language.
4. Subtitle Language: Set the subtitle
language.
5. EPG Language: Set the EPG
language.
6. TXT Language: Set the TXT
language.
7. Digital Audio: If a channel has AC3 and PCM audio language at the same time,
when you select RAW it will set AC3 audio language as default output and when you
select PCM it will set PCM audio language as default output.
8. Scart Output：While the HDMI
Mode is set to 576i or 480i mode,
you can change the scart output
mode between CVBS and RGB
mode.
9. Auto Channel Selection: If you
set ON, in the channel list will play
automatically when you highlight the
channel. If you set OFF, in the
channel list when you highlight the channel, you should press the OK button to play
it.
10. Auto Exit CH List: If you set ON, the channel list will disappear when you press
OK on a Highlighted channel. If you set OFF, the channel list will disappear when
you press OK on a playing channel.
11. Recall List: You can turn Recall List on or off. If you set ON, when you press
To Next Page
Loading...
