10. Start search: Press the ◄/► button to select Satellite & Multi-Sat & Blind
scan & Transponder & Multi-Transponder which you want to start search.
4.2.1 Antenna Settings for Satellite
Press the ◄/► or OK button you can see the pre-stored Satellite list, in this
menu, you can execute select, Add, Move, Delete, Rename Satellites.
ØSelect
In this menu, you can press the
▲/▼ keys choose the satellite
which you want to use, and
then press the OK to confirm
the setting.
ØAdd
Press RED button to add a new
satellite. Here you can input
new
Satellite angle, Satellite Direction (East, West), Band (Ku, C). OK to
confirm the setting and this new satellite will be added to the end of the Satellite
list.
ØMove
In this menu, you can Select the satellite that you want to move from the satellite
list
by pressing the GREEN button,
then press OK, you will be
asked to move the
satellite to put where, input the
destination number and press
OK. Then you can
move one satellite from one
position to another.
ØDelete
You can delete the user
satellite. Select the satellite that you want to delete from the satellite list. Then
To Next Page
Loading...
