press the YELLOW button. You will be asked to confirm whether delete the
satellite or not. If you select YES, all the channels and transponders in the
selected satellite will be deleted. And the selected satellite will disappear.
ØRename
You can press the BLUE button to change the satellite name. When the
keyboard popup, you can select the character which you want to edit the name.
4.2.2 Antenna Settings for Transponder
If you change the satellite, the transponder will be changed automatically. You
will find the transponder list of selected satellite here. In this menu, Press the
◄/► or OK button you can see the pre-stored Transponder list, and you can
execute Select, Add, Delete, Edit Transponders.
ØSelect
In this menu, you can press the ▲/▼keys choose the Transponder which
you want to use, then press OK to
confirm the setting.
ØAdd
You can press the RED button to add a transponder. Here you can input new
Transponder frequency, choose polarization (Ver, Hor), input new symbol rate,
and BLUE choose FEC (1/2, 2/3, 3/4, 6/5, 7/8, Auto). OK to confirm the settings,
and this new Transponder will be added to the TP list in ascend order sorted by
frequency.
ØDelete
You can delete the Transponder of the satellite. Select the Transponder that you
want to delete from the TP list. Then press the GREEN button. You will be
asked to confirm whether delete the satellite or not. If you select YES, all the
channels in the selected Transponder will be deleted, and the selected
Transponder will disappear.
ØEdit
Press yellow button to edit. Here you can set the Transponder frequency,
polarization, symbol rate and FEC.
ØDelete All
To Next Page
Loading...
