16
Transponder frequency, choose polarization (Ver, Hor), input new symbol rate,
and choose FEC (1/2, 2/3, 3/4, 6/5, 7/8, Auto). OK to confirm the settings, and
this new Transponder will be added to the TP list in ascend order sorted by
frequency.
" Delete
You can delete the Transponder of the satellite. Select the Transponder that you
want to delete from the TP list. Then press the GREEN button. You will be asked
to confirm whether delete the satellite or not. If you select YES, all the channels
in the selected Transponder will be deleted, and the selected Transponder will
disappear.
" Edit
In this menu, you can press the ▲ /▼ keys choose the Transponder which you
want to Edit, press BLUE button to edit. Here you can set the Transponder
frequency, polarization (Ver, Hor), symbol rate and FEC, then press OK to
confirm your settings, the Transponder can be changed to the one you want.
4.2.3 Search Channels from Satellite
A: Satellite Search
1. Highlight the Satellite and press the OK button to enter satellite list. And then
select one satellite you want to search.
2. Complete the antenna settings of this satellite.
3. Highlight the Start Search and select satellite then press the OK button to
confirm.
B: Multi Satellites Search
1. Highlight the Start Search and select Multi satellites then press the OK
button.
2. Highlight the satellites in the satellite list, but make sure they are all
configured to your DiSEqC Switch before press the OK to mark them.
To Next Page
Loading...
