19
antenna.
" Set East Limit
You can set the maximum motor limit for both East to prevent damage to the
antenna.
" Disable Limit
Disable West limit and East limit.
" Go to X.X
Press OK button to move the dish to the USALS Setup.
Tip: Before you use USALS, you should go to Main Menu →
INSTALLATION→ USALS Setup to set you local position firstly.
4.3 Fast scan
To fast search channels by different providers base on Astar (19.2) satellite and
the 12515 transponders.
4.4 Factory Default
You can restore the product to the factory default and you can also setup it
according to the wizard.
Warning: Please note that once you perform Factory Default all, all data and
settings will be deleted.
1. Menu->INSTALLTION -> Factory Default
2. Input the password.
3. Highlight the option you want and press the OK button to execute it.
To Next Page
Loading...
