18
1. Motor Mode:
Select DiSEqC 1.2 or USALS
using the ◄/► button.
DiSEqC 1.2: General motor
antenna using DiSEqC 1.2.
USALS: Motor antenna using
USALS.
" Move Auto[W/E]
Press ◄/► button, the dish will be motorized to East/West continuously, it will
stop until it find the best signal.
" Move west-east
Press ◄/► button, the dish will be motorized to East/West step by step, until
you find the best signal showed on the signal bar.
" Fine Tuning(1)
Input digital button to set the moving step
" Store Position
Save the current position you searched.
" Go to Position
Press OK button to move the dish to the position which you saved.
" Go to Reference
Press OK button to move the dish to 0 position.
" Set West Limit
You can set the maximum motor limit for both West to prevent damage to the
To Next Page
Loading...
