Need help?Do you have a question about the Abatron BDI3000 and is the answer not in the manual?
General| Brand | Abatron |
|---|---|
| Model | BDI3000 |
| Category | Recording Equipment |
| Language | English |
The BDI3000 is the core interface for the bdiAccess system, connecting BDM/JTAG pins to Ethernet/RS232. Supports 1.2-5.0V target systems.
Connects the BDI3000 to the target system via 20-pin JTAG connector. Highlights cable length limits for reliable operation.
Details power connection (5VDC) to the BDI3000, including voltage limits, precautions, and system power-on sequence.
Explains the BDI3000's MODE LED states (OFF, ON, BLINK) indicating operational status and firmware loading.
Describes connecting the BDI3000 to the host PC using a serial (RS232) interface, including connector pinout and cable requirements.
Covers host connection via 10/100 BASE-T Ethernet, detailing interface setup and the meaning of built-in LED indicators.
Lists required files on the CD for installing bdiAccess library, software, and firmware for Windows and Linux/Unix hosts.
Details the Windows BDI3000 Update/Setup dialog for configuring port, speed, connection, firmware, and network parameters.
Explains the Linux/Unix command-line utility for updating firmware and network parameters, outlining tasks and available parameters.
To Next Page
