ABB 1MRK002826-AG - Page 12

Control and monitoring functions
GUID-E3777F16-0B76-4157-A3BF-0B6B978863DE v20
IEC 61850 or
function name
ANSI Function description Generator
REG670
(Customized)
REG670 (A20)
REG670 (B30)
REG670 (C30)
Control
SESRSYN 25 Synchrocheck, energizing check
and synchronizing
0-2 1 2 2
APC30 3 Control functionality for up to 6 bays,
max 30 objects
(6CBs), including interlocking (see
Table
4)
0-1 1-H39 1-H39 1-H39
QCBAY Bay control 1+5/APC30 1+5/
APC30
1+5/
APC30
1+5/
APC30
LOCREM Handling of LR-switch
positions
1+5/APC30 1+5/
APC30
1+5/
APC30
1+5/
APC30
LOCREMCTRL LHMI control of PSTO 1 1 1 1
SXCBR Circuit breaker 18 18 18 18
TCMYLTC 84 Tap changer control and
supervision, 6 binary inputs
0-4 1-A31 2-A33 2
TCLYLTC 84 Tap changer control and supervision,
32 binary inputs
0-4
SLGAPC Logic rotating switch for
function
selection and LHMI presentation
15 15 15 15
VSGAPC Selector mini switch 30 30 30 30
DPGAPC Generic communication function
for Double Point indication
32 32 32 32
SPC8GAPC Single point generic control function
8 signals
5 5 5 5
AUTOBITS Automation bits, command function
for DNP3.0
3 3 3 3
SINGLECMD Single command, 16 signals 8 8 8 8
I103CMD Function commands for IEC
60870-5-103
1 1 1 1
I103GENCMD Function commands generic for IEC
60870-5-103
50 50 50 50
I103POSCMD IED commands with position
and
select for IEC
60870-5-103
50 50 50 50
I103POSCMDV IED direct commands with position
for IEC 60870-5-103
50 50 50 50
Generator protection REG670
1MRK 502 074-BEN M
Version 2.2
12 Hitachi Power Grids
© Copyright 2017 Hitachi Power Grids. All rights reserved