ABB 1MRK002826-AG - Ordering for pre-configured IED; Guidelines

27. Ordering for pre-configured IED
GUID-44AC94A2-C927-463B-BB10-F4C476745D03 v15
Guidelines
Carefully read and follow the set of rules to ensure problem-free order management.
Please refer to the available functions table for included application functions.
PCM600 can be used to make changes and/or additions to the delivered factory configuration of the pre-configured.
To obtain the complete ordering code, please combine code from the tables, as given in the example below.
Example code: REG670 *2.2-A20X00- A02H39-B1A12-AC-CA-B-A3X0-CDAB1RGN1N1XXXXXXX-KKKKXHKKLAGFSX. Using the code of each position #1-11
specified as REG670*1-2 2-3 3-4 4-5 6-7 7-8-9 9 9 9-10 10 10 10-11 11 11 11 11 11 11 11 11 11 11
Product version Configuration alternatives Software options
# 1 - 2 - 3 -
REG670* 2.2 - - -
Language Casing and Mounting Power supply HMI Analog system
4 - 5 6 - 7 - 8 - 9 -
- - - - -
Binary input/output modules Station communication, remote end serial communication and time
synchronization
10 - 11
-
Position
Product version #1 Notes and rules
Version no. 2.2
Selection for position #1 2.2
Configuration alternatives Ordering no #2 Notes and rules
Generator protection, Generator differential and back-up 1MRK004826-AG A20
Generator protection, Generator differential and generator/transformer back-up 1MRK004826-BG B30
Generator protection, Generator/transformer differential and back-up 1MRK004826-CG C30
ACT configuration
ABB standard configuration X00
Selection for
position #2
Generator protection REG670
1MRK 502 074-BEN M
Version 2.2
150 Hitachi Power Grids
© Copyright 2017 Hitachi Power Grids. All rights reserved