ABB 3000 Series - Page 55

TABLE 7-2. PROTECTOR PLATES FOR TEFLON LINED METERS
Order number consists of two protector plates and mounting screws. Grounding rings are not
available for this application. When ordering, specify 614B452U__ and suffix from the table below.
Protector
Plate Material
Meter Size
Inches =
(mm) =
Flange Rating ANSI Class 150
1
⁄
2
(15)
1
(25)
1
1
⁄
2
(40)
2
(50)
3
(80)
4
(100)
316 sst Suffix = 020304050607
HAST "C" Suffix = 161718192021
Protector
Plate Material
Meter Size
Inch =
(mm) =
Flange Rating
ANSI Class 300
4
(100)
316 sst Suffix = 40
HAST "C" Suffix = 47
TABLE 7-3. LINER PROTECTOR/GROUNDING RINGS FOR TEFLON LINED METERS
Order number consists of two protector plates which serve as grounding rings, and mounting screws.
Separate grounding rings are not available for this application. When ordering, specify 614B384U__
and suffix from the table below.
Protector
Plate Material
Meter Size
Inches =
(mm) =
Flange Rating
ANSI Class 150
Flange Rating
ANSI Class 300
6
(150)
8
(200)
10
(250)
12
(300)
6
(150)
8
(200)
10
(250)
12
(300)
316 sst Suffix = 0107131904101622
HAST "C" Suffix = 0208142005111723
TABLE 7-4. GROUNDING RINGS - SIZES 1 THROUGH 4 INCHES
Order number consists of two grounding rings and mounting screws.When ordering, add suffix to the
BM number.
Meter Size Material =
Flange Rating
ANSI Class 150
Flange Rating
ANSI Class 300
316 SST HAST "C" 316 SST
Inches mm BM No. Suffix BM No. Suffix
1 25 800D508 U02 U10 800D708 U03
1
1
⁄
2
40 800D508 U03 U11 ---------- ---
2 50 800D508 U04 U12 800D708 U04
3 80 800D508 U05 U13 800D708 U05
4 100 800D508 U06 U14 800D708 U06
10DS3111E INSTRUCTION BULLETIN
7-2