Need help?Do you have a question about the ABB 3AXD50000020437 and is the answer not in the manual?
General| Type | DCS800 |
|---|---|
| Protection Class | IP00 |
| Input Voltage | 380...500 V AC |
| Cooling Method | Air cooling |
| Communication Interface | Modbus |
Details essential safety measures for electrical work on drives and motors.
Explains the Pt100 thermal protection function and its capabilities for hazardous areas.
Covers manual reset configuration for the Pt100 thermal protection function.
Guidance on commissioning drives in hazardous environments for Pt100.
General information and guidelines for wiring the ATEX Pt100 system.
Details insulation requirements for Pt100 sensor circuits in ATEX applications.
General guidelines for wiring ATEX Pt100 motor thermal protection systems.
Procedure for testing and verifying the ATEX Pt100 system.
Guides on diagnosing and resolving faults for ATEX Pt100 systems.
Parameters related to the drive and inverter configuration.
Setting minimum switching frequency for Ex motors in the drive.
Configures manual reset and status indications for thermal protection.
Details methods to configure motor overtemperature indication in the drive.
Parameters and configuration steps for the FSO safety module.
Configuration parameters related to the STO function of the FSO module.
Configuration parameters for the SS1 function of the FSO module.
General rules, notes, and definitions related to safety functions.
Details the EU-Type Examination Certificate information.
States the product's conformity with the ATEX Directive.
To Next Page
